Graphite Mould
Graphite Mould

The Graphite mould is made of high quality graphite suitable for high quality welding work and can be used for several times. The exothermic welding reaction takes place in a specially designed, semi permanent graphite mould.The mould is designed and manufactured with a special weld cavity and it is this cavity that the molten metal is allowed to flow to all sections.


Mould Handle Clamp
Mould Handle Clamp

These will fit 90% of all standard exothermic mould. Normally we recommend one Handle for every two mould.



Steel Disc
Steel Disc

Steel disc are very important.The disc act as timing device to allow the welding powder to heat to proper temperature. One Metal is must for every shot.


Hand Gloves
Hand Gloves

Ignite Powder (Starting powder) Steel disc are very important.The disc act as timing device to allow the welding powder to heat to proper temperature. One Metal is must for every shot.

Flintigni†e
Flintigni†e

It is designed with the advantages of safety and convenience. It is used to ignite starting Powder in order to result in exothermic reaction. We recommend one Flint ignite for every 50 Shots.

Mould Cleaning Brush
Mould Cleaning Brush

The Graphite mould is made of high quality graphite suitable for high quality welding work and can be used for several times. The exothermic welding reaction takes place in a specially designed, semi-permanent graphite mould. The mold is designed and manufactured with a specific weld cavity and it is in this cavity that the molten metal is allowed to flow to all sections.


Cable Cleaning Brush
Cable Cleaning Brush

Cable Cleaning Brush used for cleaning cable before making connection. We recommend a Pair of Brush for 50 Connection.


Mould Scraper
Mould Scraper

It is used to remove the metal Scrap and Dust from the Mould. We recommend one Slag Tool for 250 Connection.

File Cord (FCB)
File Cord (FCB)

It is used to clean busbar before making connection. We recommend one Slag Tool for 50 Connection.

Sealing-Compound-(SCD)
Sealing Compound (SCD)

Sealing Compound is used to fill the gap on the mould where the conductor is passing. We recommend one Pocket of Sealing Compound for 1OO Connection.


Flame Torch (FT)
Flame Torch (FT)

Flame Torch is used to warm the mould. We recommend one Flame Torch for 250 Joints.


Safety Eye Glosses (SEG)
Safety Eye Glosses (SEG)

Safety Eye Glass should be wear to protect eyes.