The copper bonded ground rods or copper bonded earthing rods is the most widely used grounding electrode. It dissipates the current to the earth through physical connectivity. Earth rods are commonly made from solid copper or stainless steel with copper bonding. Nikkon offers a complete line of rods and accessories to meet the industry needs.
Copper bonded grounding electrode has been considered as the most apt equipment for earthing purposes owing to excellent resistance to oxidization. The main copper coated earth electrode is saved by the copper bonding from corrosion and the crystalline mixture is filled within the electrode.
Earthing Clamps used for attaching ground wire to rod.
- UL Listed.
Compression Couplers for Pointed Rods.
Ignite Powderal so known as Starting Powder is required and is must.This
resulting exothermic reaction reduces the weld powder to molten copper alloy.
- Upto 250 Micron CU Bonded on steel.ADVANTAGES :
- Life span due to 250 micron CU Bonded
life is more than Earthing Rods.
- Good Conductivity.
- Cost Effective.
A lightning arrester (alternative spelling lightning arrestor) (also
called lightning diverter) is a device used on electric power systems and
telecommunication systems to protect the insulation and conductors of the system from
the damaging effects of lightning.
The Graphite mould is made of high quality graphite suitable for high
quality welding work and can be used for several times. The exothermic welding reaction
takes place in a specially designed, semi permanent graphite mould.The mould is
designed and manufactured with a specific weld cavity and it is in this cavity that the
molten metal is allowed to flow to all sections.
These will fit 90% of all standard exothermic Mould. Normally we recommend
one Handle for every two mould.
Steel disc are very important.The disc act as timing device to allow the
welding powder to heat top roper temperature. One Metal is must for every shot.
Our Exothermic Weld Powder is the most reliable and consistently -
performing weld metal available with us.The standards Size Packing available are – 15
Grams, 25 Grams, 32 Grams, 45 Grams, 65 Grams, 90 Grams 115 Grams, 150 Grams, 200
Grams, 250 Grams.Our standard packing for welding powder is the following – Firstly
welding powder is in the tube and starting powder in small zip bag.
Gloves is required for safety purpose as the Exothermic Weld Powdermelts
at more than 1400 degree Celsius. One Hand Gloves Good for 250 Joints.
It is designed with the advantages of safety and convenience.It is used to
ignite starting Powder in order to result in exothermic reaction. We recommend one
Flint ignite for every 50 Shots.
The Graphite mould is made of high quality graphite suitable for high
quality welding work and can be used for several times. The exothermic welding reaction
takes place in a specially designed, semi permanent graphite mould. The mouldis
designed and manufactured with a specific weld cavity and it is in this cavity that the
molten metal is allowed to flow to all sections.
Cable Cleaning Brush used for cleaning cable before making connection. We
recommend a Pair of Brush for 50 Connection.
It is used to remove the metal Scrap and Dust from the Mould. We recommend
one Slag Tool for 250 Connection.
It is used to clean busbar before making connection. We recommend one Slag
Tool for 50 Connection.
Sealing Compound is used to fill the gap on the mould where the conductor
is passing. We recommend one Packet of Sealing Compound for 100 Connection.
Flame Torch is used to warm the mould. We recommend one Flame Torch for
250 Joints.
Safety Eye Glass should be wear to protect eyes.
